Assessment Validation Simplified: How to Validate Assessments
Assessment Validation Simplified: How to Validate Assessments
Blog Article
After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.
Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.
To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We must adhere to the standards by conducting two types of validation.
The initial assessment validation ensures your RTO's assessments comply with the training package requirements.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
This indicates validation occurs before and after the assessment process. We will focus on the first type: assessment tool validation.
The Basics of the Two Types of Assessment Validation
Assessment Validation Explained
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.
Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
How to Properly Conduct Assessment Tool Validation
Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.
Optimal Timing for Assessment Tool Validation
The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.
No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.
However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:
- resources are updated
- add new training products on scope
- review your course against training product updates
- when learning resources are identified as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.
Which Training Products to Validate?
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
What You Need for Assessment Tool Validation
Learning Materials
Since you are conducting assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates created apart from the workbook and marking guide. Validate them to ensure they fit the assessment task and address unit requirements.
Validation Team
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
Overall, your validation panel should have:
Up-to-date vocational competencies and industry skills pertinent to the unit being validated
Up-to-date knowledge and skills in vocational teaching and learning
One of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the successor version
Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists with the validation process and documentation. It makes it easier to view how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Look For?
As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Assessment Principles
Fairness – Does the assessment ensure equal opportunity and access for everyone?
Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?
Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?
Key Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Are the assessment tools aligned with current units of competency and contemporary industry practices?
Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.
To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:
Practice Your Teachings
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy change
prepare bottles, feed babies from bottles, and clean equipment
prepare solids and feed infants
respond to infant signs and cues appropriately
settle infants for sleep and prepare them
monitor and promote physical exploration and gross motor skills suitable for the age
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Pay Attention to Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Complete or Not Competent
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?
Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?
The answer might include:
Necessary resources
Relevant expenses
Time assigned for activities
Specified roles and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Answers can include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, PPE
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolating, engineering controls, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery – isolating, use of engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such website guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.